Transcription

Solstice ConferenceUser GuideUpdated January 27, 2022Mersive Technologies, Inc. www.mersive.com Copyright 2022 Mersive

Table of ContentsSolst ice Conf erence Overview2How t o Use Solst ice Conf erence6Sharing Cont ent Using t he Solst ice App19App-Free Sharing t o a Solst ice Display23How t o Cont rol Cont ent w it h t he Solst ice App27Solst ice Ink291

Solstice Conference OverviewSolstice Conference is a softw are-enabled capability that enhances video conferencing w ith rich,multi-participant content sharing to deliver a better collaboration experience betw een onsite andremote users. Solstice Conference paired w ith room audio/ video devices delivers the convenience ofa traditional room system w ith the flexibility to use any conferencing service installed on the meetinghost’s laptop.Solstice Conference allow s you to use Solstice w ith most laptop-based conferencing apps to addmeeting support for remote attendees in Solstice-enabled rooms. Solstice Conference offers theflexibility to use the conferencing service of choice and provides w ireless connectivity to roomaudio/ video devices attached to the Solstice Pod via USB. Solstice Conference can be enabled for allGen3 Pods on the latest version of Solstice. A current Solstice Subscription is needed to utilize theSolstice Conference capabilities.Key CapabilitiesllllLeverages w eb conferencing applications running on local users’ laptops.Enables meeting hosts to w irelessly connect to plug-and-play USB devices attached to the Podto share room audio/ video in the w eb conference.Uses integrated room and personal calendars to support a one-step start for scheduled w ebconferences.Allow s the meeting host to share the full in-room display to the w eb conference so remote userscan see everything happening on the display, including multi-source content sharing, mark up,and more.System RequirementslGen3 Solstice Pod on the latest Solstice softw are versionlCurrent Solstice SubscriptionlM eeting host laptop (Window s or macOS, recommended specs below )lllLatest version of the Solstice app w ith the bundled Solstice Conference capability installed(required for meeting host)3rd-party w eb conferencing application for meeting host and remote users (not required forother on-site meeting participants)Solstice Discovery Service (SDS) strongly recommended; required for one-step start ofscheduled w eb conferenceslUSB room camera and/ or audio devices (optional) - (verified supported device list)lM icrosoft Exchange, Office 365, or Google Workspace calendar integrations (optional)2

Host Laptop Minimum SpecsSolstice Conference capabilities are supported on laptop devices that meet or exceed the follow ingrequirements. M eeting host laptops should meet the minimum specs listed below . Other on-sitemeeting participants can w irelessly share content to the Solstice display using the Solstice app installedon their laptops or mobile devices. As a note, the meeting host capability for Solstice Conference is notsupported on mobile devices.Using the Solstice app only for w ireless content sharing, control, and markupdoes not require the device to meet the minimum specs listed below . Formore information, see Solstice User App.Minimum Hardware Recommendations for Meeting Host LaptopsWindowsOperating SystemWindow s 10 version 1903 or laterM inimum SpecsIntel i5 quad core processor(6th Gen or new er); 8GBmemory; processor speed of 1.6 GHz/ min or better.llImportant NotesLaptop machines w ith dual-core processorsnot currently supported.M icrosoft Surface laptop devices and similartablet-like devices are not currently supported,including (but not limited to) M icrosoftSurface Laptop, Surface Book, and Surface Pro.To check your laptop specs, open Command Prompt, enter “dxdiag”, then run.M acOSOperating SystemCatalina 10.15 or laterM inimum SpecsIntel i5 quad core processor; 8GB memory;processor speed of 1.2 GHz or better3

lImportant NotesllApple M 1 devices are supported; how ever,some M 1 devices may experienceperformance issues. M ersive is currentlyw orking to resolve this.Laptop machines w ith dual-core processorsnot currently supported.M acbook Air 2021 laptops can be used w ithSolstice Conference; how ever, older M acbookAir laptops are not currently supported.If you are using a 4K laptop, M ersive recommends scaling your screenresolution dow n to 1080p w hen using Solstice Conference.Supported Conferencing ServicesBelow are the supported conferencing services depending on the operating system of the meetinghost laptop. For support listed as "brow ser-based version only," Solstice Conference's full functionality(i.e. the ability to share the Solstice display to remote users via the conferencing application) is onlysupported in the brow ser-based version of that conferencing application.For best compatibility, check that your video conferencing softw are isupdated to the latest version.ZoomWindowsFullTeamsFullWebexGoToM eeting/ LogM eInBrow serbasedversiononly*FullmacOSFullBrow serbased version only*NotesBrow serbased version only*Window s: To sharedisplay, select Podname.M icrosoft w ill fix 3rdparty support.FullBlue JeansFullPartialGoogle M eetFullFullWindow s: To sharedisplay, use brow serapp.4

ChimeRingCentralSlackPartialWindow s: To sharedisplay, use brow serapp.FullRingCentralVideo online(brow serbased) only*RingCentral M eetingsw as retired byRingCentral. M ersiveis w orking to addRingCentral appsupport on macOS.FullBrow serbased version only*Full*Chrome, Firefox, M icrosoft Edge, and Safari brow sers supported5

How to Use Solstice ConferenceThese instructions outline steps for meeting hosts to use Solstice Conference to bridge their w eb orvideo conference to Solstice.Scheduled Conferences vs. Non-Scheduled ConferencesScheduled conferences are those w hich are scheduled on a room calendar integrated w ith a SolsticePod, or those w hich are scheduled on a personal calendar integrated in the Solstice app. The details forthe conference - e.g. M eeting ID, Passcode, etc. - need to be included in the body of the scheduledevent. Clicking Start w ill connect the Pod to the scheduled conference (see Launch a Scheduled WebConference). If conflicting conferences are scheduled simultaneously in the Pod's calendar and in themeeting host computer calendar, the Solstice app w ill start the conference specified for the meetinghost computer.M ersive recommends that you start Solstice Conferences using scheduled conferences.How ever, Solstice can also "bridge" into a non-scheduled conference. If a remote conference iscurrently in progress, you can connect to the Pod and then click Bridge without a calendar event, andthen click Start. After you are connected to Solstice you can then connect to the remote conferenceusing your conferencing application and share the Solstice screen w ith the conference. (See Bridge anIn-progress M eeting to Solstice Conference.)Using Solstice Conference with Dual DisplaysIf the Pod is using dual displays, the display shared to the conference w ill be the display connected toHDM I 1 of the Pod. The screen connected to HDM I 2 w ill be labeled as a Private Display and w ill bevisible to participants in the room but w ill not be shared as part of the conference. In the Solstice applayout screen, the display shared w ith the conference is the screen on the left.Example Dual Screen Layout in Solstice App6

How ToInstall the Solstice App and Solstice ConferenceBelow are the steps you can take to dow nload and install the Solstice app and additional SolsticeConference capabilities.1. Open a brow ser on your laptop device and enter the IP address visible on the Solstice display.The Solstice Quick Connect page opens.7

2. Click the Get the App & Join button.3. If you are on a laptop PC:a. The Solstice app installer (SolsticeClientWin.exe) w ill dow nload. Click the dow nloaded fileto install the Solstice app.b. Once installed, the app w ill open automatically.c. To install Solstice Conference, go to Conference tab and click Install.d. Walk through the InstallShield w izard to install Solstice Conference.Installing Solstice Conference requires elevated permissions. Ifyou do not have elevated permissions, contact yourIT administrator.Enable Solstice Desktop Sharing on macOSDepending on your macOS security settings, you may need to give the Solstice app permission torecord your desktop to be able to share it to the Solstice display. Follow the directions below to ensurethe necessary permissions have been set before using Solstice Conference.8

1. Open your Solstice app and connect to a Solstice display.2. On the Share panel, click Desktop. If desktop sharing permission is needed, a message w illappear w ith brief directions for enabling it.3. Open System Preferences from the Dock or the Apple menu, then select Security & Privacy.4. Go to the Privacy tab and select Screen Recording from the list on the left.5. If needed, lick the lock icon in the low er left and enter the passw ord to change permissions onyour M ac.6. If the M ersive Solstice app appears on the right, check the box next to it to give it permission toshare your desktop to a Solstice display. Then skip to step 8.7. If M ersive Solstice does not appear in the allow ed apps list on the right, do the follow ing:a. Click the button below the apps list.b. Navigate to the location of the M ersive Solstice app.9

c. Select M ersive Solstice and click Open to add it to the apps list. It should be automaticallygiven screen recording permission.8. When M ersive Solstice has been checked, you w ill be prompted to Quit & Reopen to restart theSolstice app so the change w ill take effect.Enable Audio for Desktop Sharing on macOSDepending on your macOS security settings, you may need to enable desktop audio access for theSolstice app in order to access the full Solstice content sharing functionality.1. Open your Solstice app and connect to a Solstice display.2. On the Share panel, click Desktop. The Solstice app w ill minimizes. Click Sharing Desktop at thetop of your screen to un-minimize the app.3. If Auto share audio with desktop is enabled (default) in Settings Control, audio sharing shouldbe enabled automatically. If it is not, click the speaker icon after the name of the connectedSolstice display to turn it on.4. In the prompt that appears, click Yes.5. If needed, enter your admin passw ord and click OK. A System Extension Blocked pop-up shouldthen appear.6. Click Open Security Preferences to open the Security & Privacy settings.10

7. Next to 'System softw are from developer "M ersive Technologies" w as blocked from loading',click Allow.8. Open System Preferences Sound.9. From the Play sound effects through drop-dow n, select Desktop Streaming Audio Device.11

10. Check the Show volume in menu bar option.11. Go back to the Solstice app, stop sharing, and click Disconnect.12. Reconnect to the Solstice display, then share your desktop. Your desktop audio w ill automaticallybe streamed to the in-room display.If your desktop audio isn't streaming to the display, make sure thespeaker icon after the connected display name in your Solstice app isn'tturned off (appearing w ith a red slash), and that Desktop StreamingAudio Device is selected from your M ac's Volume control.Integrate Your Personal O365 CalendarBy integrating your O365 calendar w ith your Solstice app, Solstice can launch w eb conferencesscheduled on your personal calendar w hen you connect to a Solstice display, making it easier to meetw ith remote participants. This capability is supported for Window s or macOS laptops only.12

When integrating your calendar, you w ill be prompted to sign into your Office 365 account using thesecure M icrosoft Graph API OAuth2 authorization flow . M icrosoft w ill present you w ith the option togrant Solstice read-only access to your calendar. This allow s the Solstice App to retrieve your calendarentries for upcoming meetings and enable a one-step start for scheduled video conferences.1. In the Solstice desktop app, click Settings Conference.2. In the Calendar integration section, click Sign in with M icrosoft. The M icrosoft Online login pagew ill open in a w eb brow ser.3. Enter your M icrosoft O365 login credentials and sign in. If successful, the brow ser w ill display a"Success" message.4. Close the brow ser and return to your Solstice app.If you are unable to save your O365 credentials and are prompted tore-enter them each time you launch the Solstice app, the CredentialM anager service in Window s may have been disabled by your IT team.5. If you w ish to disconnect your O365 calendar at any time, go back to Settings Conference Calendar integration and click Sign out.If your O365 calendar is authenticated w ith Azure AD, your IT administratormay need to grant admin consent for the Solstice user app in the AzureActive Directory app registrations.For more information on how to set up an integrated room calendar for aSolstice-enabled w orkspace, w hich enables the Solstice display to show andinteract w ith meetings scheduled for the space, see Solstice Cloud: CalendarTemplate.Launch a Scheduled W eb Conference1. Launch the Solstice app on your laptop.2. Connect to the Solstice display by clicking on the display name. If prompted, enter in the 4-digitscreen key listed on the display.3. Once connected, go to the Conference tab in your Solstice app.13

4. Click Start. Once the process begins:lYour desktop w ill be shared to the in-room display.lAny available USB room camera or mic w ill be w irelessly connected to your laptop.lIf a calendar entry w as recognized as a w eb conference, the conferencing application w illlaunch and start the appropriate meeting. Some conferencing applications may require anadditional step to launch the meeting.5. Once you have joined your w eb conference meeting, if there is a room camera and microphoneconnected to Solstice, you w ill be able to select the room camera and microphone as themeeting's audio and video sources.6. To share the Solstice display to remote attendees, select Screen 2 from the sharing optionsw ithin the video conferencing application. (If the Pod is configured w ith dual displays, see UsingSolstice Conference w ith Dual Displays to determine w hich display w ill be shared w ith theconference.)7. After you are done hosting the conference, stop sharing the display, end the video call, anddisconnect from the Solstice display.After you are done hosting the conference, stop sharing the display, end the video call, and disconnectfrom the Solstice display.Bridge an In-progress M eeting to Solstice Conference14

There are multiple w ays that Solstice Conference can support your w eb conference. This how -to w illexplain how to use bridge a video conference that has already been started to Solstice Conference.1. Once you have started your w eb conference, open your Solstice app.2. Connect to the Solstice display by clicking on the display name. If prompted, enter in the 4-digitscreen key listed on the display.3. Once connected, go to the Conference tab in your Solstice app and click the Bridge without acalendar event checkbox.4. Click Start. After the conference has been bridged, the Conference tab w ill say that you'recurrently the host of a bridged w eb conference.If there is a conflicting meeting listed on the Pod calendar, you shouldselect the Bridge without this calendar event checkbox, then click Start.If you do not select this option before starting, Solstice w illautomatically connect to the scheduled w eb conference.5. After you have joined your video conference meeting, connect to the conference in progressusing your conferencing application.6. if there is a room camera and microphone connected to Solstice, the room camera andmicrophone w ill be used as the meeting's audio and video sources.7. To share the Solstice display to remote attendees, select Screen 2 from the sharing optionsw ithin the video conferencing application. (If the Pod is configured w ith dual displays see UsingSolstice Conference w ith Dual Displays to determine w hich display w ill be shared w ith theconference.)8. After you are done hosting the conference, stop sharing the display, end the video call, anddisconnect from the Solstice display.End Your M eeting and Disconnect from SolsticeAs the host, w hen your meeting is finished you w ill need to end your video conference and disconnectfrom Solstice. Here are some w ays you can disconnect from Solstice:llClick the Disconnect button at the top of the app w indow . You w ill be prompted to confirm thatyou w ant to disconnect from the display.Close the Solstice app w indow :oOn a laptop, click the Close 'X' icon. Solstice w ill ask if you w ish to disconnect from thedisplay and stop sharing all content. If yes, click Disconnect.15

olOn a mobile device, close the app w indow and Solstice w ill automatically disconnect thedevice from the display.Starting in Solstice version 5.4, w hen Solstice Location Service is enabled (Settings Control),you can also turn on auto-disconnect. After learning the location of a Solstice Pod, the Solsticeapp can detect you have left the meeting area w hile still connected to the Pod and may promptyou to disconnect (currently supported on Window s, macOS, and Android). When the autodisconnect prompt appears, you may do one of the follow ing:oClick Disconnect to immediately disconnect from the Solstice Pod.oClick Cancel to dismiss the auto-disconnect prompt. You w ill not be prompted todisconnect again for that connection.oAllow the 10-second countdow n to complete to let the Solstice app automaticallydisconnect you.Use the menu under the Solstice Location Service setting to turn onauto-disconnect and adjust the sensitivity that location services w ill useto automatically disconnect the device from the Solstice Pod. LocationServices must also be enabled on the Pod to use this functionality.When using Solstice Conference, remember to also end your video conference inyour conferencing app.FAQWhy can't I minimize or close my Solstice app window?Your Solstice app might be docked to your system tray. To remove this setting and regain controls forthe Solstice app w indow , right click the Solstice icon in your system tray and deselect Dock to systemtray.I'm hosting a meeting, and Solstice keeps reminding me that I'm sharing a post to a display. How canI turn this off?To limit Solstice notifications, open your Solstice desktop app, then go to Settings. Under General Notifications, select either None or Critical, depending on your notification preferences.16

Notification settings also control notifications for Solstice Conference. Selecting None w illalso turn off performance and compatibility notifications for Solstice Conference.Why does the Solstice display show as Screen 3 in my video conferencing application?This may be the case if your laptop is configured to have additional virtual desktops. M ersive stronglyadvises against using additional virtual desktops alongside Solstice Conference.Why I'm seeing a mirroring effect when I use Solstice Conference on a Mac laptop?On macOS, a "hall of mirrors" visual effect may appear w hen using Solstice Conference if theConference drivers are not loading correctly. Open Security & Privacy settings and check the makesure you have allow ed drivers from M ersive.Why does changing virtual display settings with Solstice Conference create a "hall of mirrors" on myMac?On macOS, w hen the Solstice Conference virtual monitor is set as the primary display, a know n issueexists in Solstice 5.4 that causes a video effect that resembles a hall of mirrors. Once the issue hasbeen triggered, the Solstice Conference drivers often must be uninstalled and reinstalled to resolve it.M ersive strongly recommends not accessing the display settings w hile using Solstice Conference toavoid this issue. For help uninstalling and reinstalling Conference drivers, contact M ersive Support.Why is the Solstice user app failing to share my desktop and app windows on my Windows laptopwith dual graphics cards?In the Solstice user app version 5.4 on Window s laptops w ith dual graphics cards, an issue has beenreported that manually setting the dedicated graphics card as primary can prevent the Solstice appfrom successfully sharing the user's Desktop and App Window s. In this case, a Sharing Error mayappear in the Solstice app; M edia File sharing is usually successful. This issue can usually be resolvedby changing the Window s and/ or graphics card settings to allow the graphics processor to beautomatically selected.Why does my Pod with digital signage enabled spontaneously reboot after being used for SolsticeConference?For Solstice Pods running digital signage feeds that are also used regularly for Solstice Conference, aknow n issue exists in Solstice 5.4 that occasionally causes Solstice to become unstable and the Pod to17

spontaneously reboot. M ersive recommends that Pods experiencing this issue be configured toperform a daily reboot, w hich should avoid spontaneous restarts. A Solstice admin can enable DailyReboots in the Solstice Cloud Advanced settings.18

Sharing Content Using the Solstice AppSolstice improves meeting productivity and engagement w ith multi-participant content sharing,control, and markup. With the M ersive Solstice app installed on a laptop, tablet, or mobile device, userscan share and control content on the display connected to a Solstice Pod.Users can also use one of the supported app-free sharing options to share to the Solstice display if theydon't have the Solstice app. See App-Free Sharing to a Solstice Display to learn more about Solstice'sapp-free sharing options.How to Connect to a Solstice DisplayEnsure you are connected to a netw ork listed on the display’s Welcome Screen, then connect to theSolstice display to share content:1. Open the Solstice app. A list of Solstice displays you have previously connected to or that areavailable via display discovery (if enabled for your Solstice deployment) w ill appear.2. Click the name of the desired Solstice display to connect.3. To find a specific display in the discovered list, you can:lSearch for a specific display by name in the search bar.lClick Tags to filter the list of displays by assigned tags (Enterprise Edition only).19

4. If prompted, enter the screen key that appears on the display.5. By default, the user app joins the collaboration session w ith full media posting and control rights.How to Share Content Using the Solstice App on a LaptopOn the Share tab of the Solstice desktop app, you can w irelessly share an unlimited amount of contentto the Solstice display using any of the follow ing options. Note that the content shared to Solstice w illnever leave your device, only pixels w ill be streamed to the display.lDesktop: Share a real-time view of your desktop mirrored to the display. The entire desktop,including any open application w indow s, w ill be shared in real-time.To stop sharing your desktop audio, click the speaker icon after theconnected display name to appear w ith a red slash (off). If you aresharing desktop audio on a M ac, you may have additional setup toenable it. See Enable Audio for Desktop Sharing on macOS for moreinformation.llApp Window: Share a real-time view of only the selected application w indow to the display.This sharing option allow s you to maintain privacy by only sharing a single application instead ofeverything on your desktop.M edia File: Share media files such as images and videos saved locally on your laptop device tothe display. Solstice supports image and video files up to 4K resolution.Solstice supports sharing a broad range of video types, but not all videofiles are supported. If a video file is not supported, you can use theDesktop sharing option to stream the video to the display.When sharing your desktop, the Solstice app w indow w ill be hidden by default. Click the SharingDesktop bar that appears at the top of your screen to show it. You can also click Stop Sharing toquickly stop sharing your desktop.How to Share Content Using the Solstice App on a Mobile DeviceOn the Share tab of the Solstice mobile app, you can w irelessly share an unlimited amount of contentto the Solstice display using any of the follow ing options. Note that the content shared to Solstice w illnever leave your device, only pixels w ill be streamed to the display.20

lM irror Screen: Share a real-time view of your mobile device screen. Tap the speaker icon afterthe connected Solstice display name to capture audio along w ith screen mirroring.The Solstice app for Android versions 5.4 and higher support audiocapture w ith screen mirroring on Android devices running Android 10and up. Other apps may block audio capture, preventing the Solsticeapp from streaming their audio.lM edia File: Share media files such as images and videos from the device’s media library.lCamera: Take a picture w ith your mobile device and share it to the display.lTake Video: Take a video w ith your mobile device and share it to the display.To share media files, pictures, and videos be sure to grant permission for theSolstice mobile app to access your mobile device's media files, camera, andmicrophone.How to End Your Meeting and Disconnect from SolsticeWhen you are ready to finish your collaboration session, disconnect from Solstice. There are a numberof w ays to disconnect from a Solstice display:lllClick the Disconnect button at the top of the app w indow . You w ill be prompted to confirm thatyou w ant to disconnect from the display.Close the Solstice app w indow :oOn a laptop, click the Close 'X' icon. Solstice w ill ask if you w ish to disconnect from thedisplay and stop sharing all content. If yes, click Disconnect.oOn a mobile device, close the app w indow and Solstice w ill automatically disconnect thedevice from the display.Starting in Solstice version 5.4, w hen Solstice Location Service is enabled (Settings Control),you can also turn on auto-disconnect. After learning the location of a Solstice Pod, the Solsticeapp can detect you have left the meeting area w hile still connected to the Pod and may promptyou to disconnect (currently supported on Window s, macOS, and Android). When the autodisconnect prompt appears, you may do one of the follow ing:oClick Disconnect to immediately disconnect from the Solstice Pod.oClick Cancel to dismiss the auto-disconnect prompt. You w ill not be prompted todisconnect again for that connection.oAllow the 10-second countdow n to complete to let the Solstice app automaticallydisconnect you.21

Use the menu under the Solstice Location Service setting to turn onauto-disconnect and adjust the sensitivity that location services w ill useto automatically disconnect the device from the Solstice Pod. LocationServices must also be enabled on the Pod to use this functionality.When using Solstice Conference, remember to also end your video conference inyour conferencing app.22

App-Free Sharing to a Solstice DisplaySolstice supports multiple app-free sharing options so that users can share their device screen to theSolstice display w ithout needing the Solstice App. This allow s for guest and occasional users to quicklyshare content in a Solstice room. Solstice supports app-free sharing using AirPlay, M iracast, brow serbased sharing, or a standard HDM I connection.How to Mirror Your iOS Device Screen Using AirPlaySolstice supports full mirroring of iOS 7 devices (Apple iPhones and iPads) that feature Apple’sAirPlay functionality. AirPlay mirroring is accomplished through the device’s native AirPlay feature,using a similar process as connecting to an Apple TV.If you are unable to mirror your iOS device using AirPlay, contact your ITadministrator to make sure that AirPlay mirroring is enabled for the Solsticedisplay.1. Ensure the iOS device is connected to the WiFi netw ork used to connect to the Solstice display.2. Open the iOS Control Center:llOn an iPhone X or later, or an iPad w ith iPadOS 13 or later, sw ipe dow n from the upperright corner of the screen.On an iPhone 8 or earlier or iOS 11 or earlier, sw ipe up from the bottom of the screen.3. Tap the Screen M irroring icon and select the desired Solstice display from the list that appears.4. If the desired Solstice display does not appear in the AirPlay menu of your device, open theSolstice App and connect to the desired display, then repeat steps 2 and 3.5. If prompted for an AirPlay code, enter the screen key visible on the Solstice display. Your devicew ill connect w irelessly to the display and your screen w ill be streamed in real-time.6. To stop mirroring your screen to the display, open the iOS Control Center again, tap the ScreenM irroring icon for the connected Pod, then tap Stop M irroring.An AirPlay option may also appear w hen view ing photos or videos in iOS. Photosand videos shared via AirPlay generally appear full screen on the Solstice display.How to Mirror Your macOS Device Screen Using AirPlayIf your organization has enabled streaming w ith AirPlay, users w ithout the Solstice user app canconnect and share their screen to the display using AirPlay capabilities on macOS devices (High Sierraand later). AirPlay mirroring is accomplished through a device’s native AirPlay feature, using a processsimilar to connecting to an Apple TV.23

If you are unable to mirror your macOS device using AirPlay, contact your ITadministrator to make sure that AirPlay mirroring is enabled for the Solsticedisplay.1. Ensure the macOS device is connected to the WiFi netw ork used to connect to the Solsticedisplay.2. From the top menu bar, either select the AirPlay icon or open the Control Panel from the top barand select Screen M irroring. Then select the desired Solstice display.3. If prompted for an AirPlay code, enter the 4-digit screen key visible on t

Dec 17, 2021 · GoToMeeting/LogMeIn Full Full Blue Jeans Full Partial Windows:Toshare display,usebrowser app. GoogleMeet Full Full Chime Full Partial Windows:Toshare display,usebrowser app. RingCentral Full RingCentral Videoonline (browser-based)only* RingCentralMeetings wasreti